PWQ-1000
Compact Distribution Network Water Quality Monitoring System
350 × 270 × 550 mm7-inch color touchscreenAC 85–500 VAC / DC 9–36 VDC
Multiparameter and project systems
Integrated water-quality instruments
Configure compact systems, stations, buoys, controllers and automatic sampling around the required parameters, communications and project conditions.
01
Measurement parameters covered
Confirm the measurement objective by parameter. Online parameters continue to a dedicated selection center.
pHpH
ORPOxidation reduction potential
ECConductivity
DODissolved oxygen
NTUTurbidity
Cl₂ / ClO₂Chlorine / chlorine dioxide
PCUColor
NH₄-NAmmonia nitrogen
COD / UV254Organic load
Chl-aChlorophyll-a
BGABlue-green algae
TEMPTemperature
02
Instrument families and models
These models come from the current product database. Confirm the exact range, probe, accessories and interfaces on the product page or during quotation.
PMA9000
Standard Automatic Water Quality Monitoring Station
0–14 pH · ±0.1 pH10–5000 μS/cm · ±3% or ±3 μS/cm, whichever is greater0–20 mg/L or 0–200% saturation · ±3% of reading or ±0.3 mg/L, whichever is greater
PB-030-AY
Mini Configurable Water Quality Monitoring Buoy
Up to 4 sensors simultaneouslypH and dissolved oxygen; expandable for conductivity, ammonia and turbidity326 × 300 × 200 mm
PB-060-AY
Compact Configurable Water Quality Monitoring Buoy
Up to 6 probes, each ≤75 mm diameter and ≤400 mm long0.6 × 0.6 × 0.7 m35 kg
03
Not sure which type or model fits?
Send the water matrix, parameter, range, use location and interface requirement, and we will recommend a suitable configuration across the four instrument types.
Contact FUNEL
Tell us what you need to measure.
We will respond with a recommended configuration, supporting documentation and quotation.