0.00–250 NTU
Laboratory and field instrument
VX-AQ Aquaculture Water Quality Analyzer
A structured product page based on the current technical file. One-year warranty. Normal 3–5 day lead time from stock. Final measurement configuration is confirmed during quotation.
0.00–250 NTU6.5–8.55–400 mg/L
01
Product and supply highlights
6.5–8.5
5–400 mg/L
10–200 mg/L
One-year warranty
Normally in stock · 3–5 day lead time
02
Product technical specifications
- Turbidity
- 0.00–250 NTU
- pH
- 6.5–8.5
- Total hardness
- 5–400 mg/L
- Total alkalinity
- 10–200 mg/L
- Ammonia nitrogen
- 0.01–2.00 mg/L
- Nitrite
- 0.003–0.500 mg/L
- Dissolved oxygen
- 0.2–15.0 mg/L
- Sulfide
- 0.02–1.00 mg/L
- Fluoride
- 0.1–2.0 mg/L
- Optical system
- LED and silicon photodiode; integrated scattering / transmission path
- Reading modes
- Concentration, absorbance and % transmittance
- Programs
- Built-in standard programs
- Interface language
- Chinese / English
- Data interface
- USB
- Data storage
- Historical records
- Operating environment
- 0–50°C; ≤90% RH, non-condensing
- Sample vials
- 25 mm / 16 mm
- Housing
- Injection-molded ABS
- Power
- 2 × AA batteries or USB
- Dimensions
- 210 × 84 × 76 mm
03
Recommended applications
Aquaculture water
Check ponds, recirculating systems and culture water using the documented programs.
Rapid field screening
Run multiparameter checks and record results at the culture site.
Treatment verification
Check make-up water, treated water and abnormal samples.
Configuration review
Confirm final programs against the species, water matrix and target ranges.
04
Confirm the final configuration before quotation
This page shows only values verified in the current source. Standard items, options, reagents, consumables and order codes are not invented and are confirmed against the actual requirement.
- 01Water matrix and application
- 02Required parameters and expected ranges
- 03Laboratory or field use
- 04Quantity, destination and delivery requirement
05
Technical and quotation documents
The values on this page are structured from the current supplied technical file. After the model and measurement configuration are confirmed, a neutral datasheet, configuration confirmation and quotation can be prepared.
Share your project requirement- Verified parameter table on this page→
- Measurement configuration confirmation→
- Warranty and lead-time confirmation→
- Formal project quotation→
Contact FUNEL
Tell us what you need to measure.
We will respond with a recommended configuration, supporting documentation and quotation.